Summary
This article discusses a way to try to resolve a mismatch between an Installer Step Label and a Panel Title during installation for users using InstallAnywhere 2013 or later.Symptoms
This article discusses a way to try to resolve a mismatch between an Installer Step Label and a Panel Title during installation for users using InstallAnywhere 2013 or later.Note how the Installer Step Label highlighted in red, on the left, does not match the Panel Title highlighted in blue, on the right, for the following panels.
Cause
This issue is caused by unintentionally having an Installer Step Label that does not match a Panel Title or vice versa.Steps To Reproduce
Scenario 1:1. Navigate to Installer UI > Look & Feel Settings > Installer Steps > Default Installer/Uninstaller Panel Image. Click the Installer Step Labels settings button. Uncheck the Auto populate labels when saving checkbox. Click the Add Label button. Enter the Label name. Click the OK button to add the Label name.
2. Navigate to a Panel > Label Settings. Assign the new Label to the Panel.
Expected Results: The Installer Step Label should match the Panel Title.
Actual Results: The Installer Step Label does not match the Panel Title.
Scenario 2:
1. Navigate to Installer UI > Look & Feel Settings > Installer Steps > Default Installer/Uninstaller Panel Image. Click the Installer Step Labels settings button. Uncheck the Auto populate labels when saving checkbox.
2. Under the Panel > Label Settings, select the Highlight the Same Label as the Previous Panel radio button option.
Expected Results: The Installer Step Label should match the Panel Title.
Actual Results: The Installer Step Label does not match the Panel Title.
Resolution
To resolve this issue, navigate to Installer UI > Look & Feel Settings > Installer Steps > Default Installer/Uninstaller Panel Image. Click the Installer Step Labels settings button. Check the Auto populate labels when saving checkbox. Click the Auto Populate button. Click the OK button.Result: The Installer Step Label should match the Panel Title.
Additional Information
Please read these Knowledge Base articles for more information:InstallAnywhere Panel Labels Appear to Revert on Build
Auto Populate Labels when Saving
Renaming a label
Was this helpful?
0/255
Upload Attachment
File Upload
Maximum file
size allowed is 3 MB.
Supported file types:
Documents (.txt, .doc, .docx, .pdf), Images (.jpg, .png), Comma Separated Files
(.csv) Speadsheets (.xlsx, .xls)
Are you sure you want to cancel the case creation?
Case closed successfully
File Upload
Maximum file size allowed is 3 MB.
Supported file types:
Documents (.txt, .doc, .docx, .pdf), Images (.jpg, .png), Comma Separated Files
(.csv) Speadsheets (.xlsx, .xls)
Are you sure you want to close this case
| Products | Region | Phone Numbers |
|---|---|---|
| FlexNet Operations FlexNet Embedded FlexNet Publisher FlexNet Connect FlexNet Code Insight InstallAnywhere InstallShield |
North America * |
+1 630-332-2513 (toll) +1 877-279-2853 (toll-free in North America) |
| Europe * |
+44 1925 944367 (toll) +44 800 047 8642 (toll-free in Europe) |
|
| Japan * | +81 3-4540-5335 (select option 2) | |
| Australia * |
+61 3 9895 2177 +61 1800 560 603 (toll-free in Australia) |
|
|
Usage Intelligence (formerly
Revulytics) Compliance Intelligence |
Please use the Case Portal to submit your support ticket or reach out to your Revenera contact. | |
File Upload
Maximum file
size allowed is 3 MB.
Supported file types:
Documents (.txt, .doc, .docx, .pdf), Images (.jpg, .png), Comma Separated Files
(.csv) Speadsheets (.xlsx, .xls)
Case id: 00001065
Activity: Status change: 2 hours ago